BWW4B four-preset wax warmer in matte black with see-through cover, front view
BWW4B four-preset wax warmer: one power key, one temperature key and four preset lights beside the pot.

Short answer: The BeauTome BWW4B is a four-preset wax warmer built for salons and private-label waxing programs that run the same wax all day. One temperature key steps through four factory-set positions, each locked to a working temperature from your wax supplier’s data sheet before the unit ships; there is no dial to drift, no menu to learn and no display to read. The fixed non-stick pot takes hard wax beads, film wax and soft wax in 450 ml, with an 800 ml deeper-pot version on the same interface. A removable see-through lid is standard; a rear-hinged fixed cover that stays on the machine is available as a custom build. The 100 W warmer runs on 110–220 V, 50/60 Hz, ships in matte black or white, and OEM programs start at 1,080 pcs.

At a glance

ModelBeauTome BWW4B four-preset wax warmer; 450 ml removable lid standard, hinged-cover custom build
Capacity450 ml / 800 ml (800 ml on the SW4B platform code)
PotØ102 mm × 65 mm deep (450 ml); deeper pot on the 800 ml
Wax compatibilityHard wax beads, film wax, soft wax
Temperature controlFour factory-set presets, stepped with one key; no digital display
Preset valuesStandard set 45 / 55 / 65 / 80 °C; locked to your wax data sheet at production
CoverRemovable see-through lid standard; rear-hinged fixed cover with rear air holes as a custom build
Pot finishNon-stick coated fixed pan
Power100 W
Voltage110–220 V, 50/60 Hz
ColoursMatte black and white; custom colour to order
CertificationEMC (EU Directive 2014/30/EU), RoHS, FCC Part 15 Subpart B Class B
OEM MOQ1,080 pcs

Four factory-set presets on one key

The panel carries one power key, one temperature key and four indicator lights. Press the temperature key and the heater steps through four marked positions; each position is set at production, not left for the operator to guess. The standard catalog set is 45 / 55 / 65 / 80 °C: 45 °C for low-melt and sensitive-area waxes, 55 °C for standard hard wax beads, 65 °C for soft and strip wax with a higher working point, and 80 °C for high-melt film waxes. Send your four working temperatures with the order and they are locked on the line. The sample unit photographed on this page carries a 65 / 70 / 75 °C set plus one high hard-wax position; your set can be different.

Why presets instead of a dial. A dial has halfway positions that a trolley wheel or a sleeve can nudge mid-treatment, and settings drift between operators. A stepped key has no halfway position, so the setting cannot be knocked off, and every staff member works the same four numbers — no display reading, no re-testing between people.

BWW4B with the see-through lid set aside, showing the fixed non-stick pot
The fixed non-stick pan opens to the Ø102 mm pot; the lid lifts off for wax loading and cleaning.

A fixed non-stick pot for hard wax beads, film wax and soft wax

The Ø102 mm × 65 mm deep (450 ml) fixed pan carries a non-stick coating that releases the cooled wax as one piece, so switching colors takes minutes rather than a cleaning session. Do not scrape the coating with metal tools; wipe the pan clean between uses. The 800 ml version uses a deeper pot on the same body family, sized for long treatments and multiple clients.

Matte black BWW4B loaded with pink hard wax beads, lid set beside the pot
Hard wax beads load into the non-stick pot and melt to a smooth spread for application.

Heater, wax beads and applicator sticks in one kit

For a retail or private-label set, the warmer is paired with hard wax beads and wooden applicator sticks. Load the beads into the non-stick pot, let them melt to a smooth spread, then apply the wax with a wooden spatula and remove it once it sets. The beads and sticks are the consumables that turn the warmer into a working waxing kit; quantities and SKUs are configured for your market. Confirm melt behavior and compatibility with your wax in sample testing.

BWW4B cover positions: lid seated on the pot between clients, lid lifted out for wax loading and cleaning
Standard build: the see-through cover sits on the pot between clients and lifts out for loading and cleaning.

Removable lid standard, hinged fixed cover as a custom build

The BWW4B shipping today leaves the factory with a see-through lid that lifts off the pot; that remains the standard build. On a custom configuration the same lid is hinged at the rear: it swings back one-handed and holds open while both hands are in the pot, then flips closed with the same hand. The inner face never touches trolley, towel or floor, the cover cannot be lost between clients, and closing it keeps heat in and dust off the melt. The see-through panel lets you watch the melt without lifting it, and the rear air holes release pressure so the lid does not lift on its own. The hinged cover is quoted per order and built after design freeze; it is not retro-fitted to existing units.

BWW4B 800 ml deeper-pot version with wax beads visible through the see-through cover
The 800 ml unit shares the same panel and cover; only the pot is deeper and the body taller.

450 ml and 800 ml on one interface

Both capacities share the same footprint, the same four-preset panel and the same cover options. The 450 ml pot suits single-client face and underarm work; the 800 ml deeper pot fits long treatments, multiple clients, and leg and back waxing. Both run on the same 100 W element and control board, so preset values are set the same way on either unit. The two pots are separate line items — confirm the capacity mix when ordering.

Colours, voltage and OEM terms

The BWW4B ships in matte black or white, with a custom colour to order. It runs at 100 W on 110–220 V, 50/60 Hz; state your market, voltage and plug type, and the matching build is confirmed at packing. The current platform holds EMC, RoHS and FCC reports; the reports for your market are referenced in the quotation. From 1,080 pcs, OEM programs include body silk screen, panel artwork, rating label, color box and manual localization; artwork, manual and packaging are reviewed on the sample before tooling. For a quotation or sample, contact miro.wu@beautome.com.

FAQ

Why fixed presets instead of an adjustable dial? A dial drifts: settings change between operators and can be knocked mid-treatment. A stepped key has no halfway position, so it cannot be nudged off, and every operator works at the same four fixed temperatures.

Can the four preset values be changed after delivery? They are set at production from the wax data sheet you send with the order. Changing them later means reprogramming the control board on the line, so the four values should be confirmed before the order is released.

Is the hinged cover the standard version? No. The BWW4B shipping today has a see-through lid that lifts off; the hinged cover is a custom configuration on the same body, pot, element and panel, quoted per order and built after design freeze. It is not retro-fitted to existing units.

Is the 800 ml a different machine? Same interface, same footprint and same cover options; only the pot is deeper and the body taller. Preset values are set the same way on both. The two pots are separate line items — confirm the capacity mix when ordering.

Which wax does the BWW4B take? It is built for hard wax beads, film wax and soft wax. Confirm compatibility and melt behavior with your wax in sample testing.

What are the MOQ and private-label terms? OEM MOQ is 1,080 pcs, custom colours included. Artwork, manual and packaging are reviewed on the sample before tooling. For a quotation or sample, write to miro.wu@beautome.com.